LED Tape 12v 14.4w/m IP20

A 5m length of 14.4 watts per metre, 12v LED strip with self adhesive backing for easy installation. This LED Strip is available in either warm white 2900K or natural white 4200K light colour.
The strip has a very low light depreciation of just 3% after 30000 hours.
This tape is the highest quality commercial grade made to exacting manufacturing standards as detailed below:-

• Specialise LED binning system to ensure that customers receive high consistency in the LED light colours
• 99.99% gilded wires to improve the stability and longevity of the LEDs.
• Utilises phosphors with rare earth aluminates for minimal colour shift.

This product is available in 2 options:-

• Standard Lumens Output - 1050lm/m
• High Lumens Output with Epistar LEDs 1050lm/m and a CRI of 80+

The Epistar version gives up to a 70% energy saving compared to conventional LED strip.
The tape backing colour is white to give an unobtrusive appearance.
The tape in 10mm wide and has 60 individual SMD 5050 LEDs per metre.
This LED strip is suitable for dry areas and has an IP20 rating.
This tape should be powered by a 12v driver which is of a higher wattage rating than the tape being driven. Here are a range of compatible 12v drivers The tape can be simply switched or dimmed with a dimmable LED drivers or alternatively controlled by a remote controlled dimmer .
The tape is supplied in a 5m roll and can be cut to the desired length along the prescribed cut marks. Connectors are then available from the accessories section to connect pieces together and wire up the ends as necessary.
If you need and advise, shorter lengths or to use our service to make up to specific lengths please call for details.