LED Tape 12v 7.2w/m IP20

A 5m length of the highest quality commercial grade 7.2 watts per metre, 12v LED strip with self adhesive backing for easy installation. The light colour can either be selected as warm white 2900K or natural white 4200K.
The strip has a very low light depreciation of just 3% after 30000 hours.
This tape is the highest quality commercial grade made to exacting manufacturing standards as detailed below:-

• Specialise LED binning system to ensure that customers receive high consistency in the LED light colours
• 99.99% gilded wires to improve the stability and longevity of the LEDs.
• Utilises phosphors with rare earth aluminates for minimal colour shift.

This product is available in 2 options:-

• Standard Lumens Output - 330lm/m
• High Lumens Output with Epistar LEDs 525lm/m and a CRI of 80+

The Epistar version gives up to a 70% energy saving compared to conventional LED strip.
The tape backing colour is white to give an unobtrusive appearance.
The tape has 30 individual SMD 5050 LEDs per metre and is 10mm wide.
The tape is IP20 rated so suitable for dry areas.
This tape should be powered by a 12v driver which is of a greater wattage rating than the tape being driven. Here are some compatible 12v drivers The tape can be simply switched or dimmed with a dimmable LED drivers or alternatively controlled by a remote controlled dimmer .
The tape is supplied in a 5m roll and can be cut to the desired length along the prescribed cut marks. Connectors are then available from the accessories section to wire up the cut lengths.
If you need shorter lengths or our service to make up to specific lengths please call us at SLB on 01420 520521