LED Tape 12v 7.2w/m IP65 RGB

Technical Specifications:

Power Consumption = 7.2 watts per meter
LED Strip Length = 5 meters
LED Strip Width = 10 mm
Colour = RGB (red, green, blue)
Operating Voltage = 12v
LED = 30 individual SMD 5050 LEDs per meter
IP Rating = IP65
Adhesive = Self Adhesive Backing
A 5m length of 7.2 watts per metre, 12v RGB(red,green,blue) LED strip with self adhesive backing for easy installation.
The tape backing colour is white to give an unobtrusive appearance.
The tape has 30 individual SMD 5050 LEDs per metre and is 10mm wide.
The tape is IP65 rated which means that it is suitable for wet areas. Please check the IP65 standards for more details.
This RGB tape can be controlled by a standalone RGB Tape Controller and a 12v power supply. Alternatively it can be controlled through a master DMX controller or lighting automation system which has a DMX output then using a DMX Decoder in conjunction with a 12 volt power supply . In this case the 12v driver should be of a greater wattage rating than the tape being driven. Here are a range of compatible 12v drivers.
The tape is supplied as standard in a 5m roll and can be cut to the desired length along the prescribed cut marks. Connectors are then available from the accessories section to wire up the cut lengths.
Should you need shorter lengths or have any questions please call.