24v LED Strip 14.4w/m IP20

Exceeding high quality commercial grade LED strip which comes in 5m rolls of 14.4 watts per metre, 24v LED Strip with self adhesive backing strip for easy installation. The light colour of this LED Strip can be picked in warm white 2900K or as an alternative 4200K natural white.
The strip has a very low light depreciation of just 3% after 30000 hours.
This tape is the highest quality commercial grade made to exacting manufacturing standards as detailed below:-

• Specialise LED binning system to ensure that customers receive high consistency in the LED light colours
• 99.99% gilded wires to improve the stability and longevity of the LEDs.
• Utilises phosphors with rare earth aluminates for minimal colour shift.

This product is available in 2 options:-

• Standard Lumens Output - 660lm/m
• High Lumens Output, CRI 80+ with Epistar LEDs 1050lm/m

24 volt tape has the distinct advantage that it only draws half the current. Consequently longer lengths can be powered without significant light output deterioration and controllers will operate twice the length of 24 volt tape against 12 volt tape. The tape backing colour is white to give an unobtrusive appearance.
The tape in 10mm wide and has 60 individual SMD 5050 LEDs per metre.
This LED strip is suitable for dry areas and has an IP20 rating.
This tape should be powered by a 24v driver which is of a higher wattage rating than the tape being driven. Here are a range of compatible 24v drivers The tape can be simply switched or alternatively controlled by a remote controlled dimmer .
The tape is supplied in a 5m roll and can be cut to the desired length along the prescribed cut marks. Connectors are then available from the accessories section to connect pieces together and wire up the ends as necessary.
If you need and advise or shorter lengths please call for details.