24v LED Tape 7.2w/m IP20

A 5m length of 7.2 watts per metre, 24v LED strip in warm white 2900K or natural white 4200K. The tape has self adhesive backing strip for easy installation.
24 volt tape if often preferred over 12 volt tape by professional installers because it only uses half the current. This means there is less light level ( lumens) depreciation on long lengths and that controllers can drive longer runs.
There is a high lumens option which uses exceptional quality Epistar LEDs producing a higher output.
The tape backing colour is white to give an unobtrusive appearance.
The tape has 30 individual SMD 5050 LEDs per metre and is 10mm wide.
The tape is IP20 rated so suitable for dry areas.
This tape should be powered by a 24v driver which is of a greater wattage rating than the tape being driven. Here are some compatible 24v drivers The tape can be simply switched or controlled by a remote controlled dimmer with the appropriate 24 volt power supply.
The tape is supplied in a 5m roll and can be cut to the desired length along the prescribed cut marks. Connectors are then available from the accessories section to wire up the cut lengths.
If you need shorter lengths or would like to use our facility to cut to prescribed lengths and solder on leads then please call for details.