24v LED Tape 7.2w/m IP65 ww

A 5m length of 7.2 watts per metre, 24v LED strip. 2700K warm white light colour.
This tape is the highest quality Epistar with high lumens output.
It has self adhesive backing strip for easy installation.
24 volt tape uses only half the current of 24 volt tape so is preferred certainly for longer runs so there is not LED light level reduction due to voltage drops. Also controllers can operate on double the tape length.
The tape backing colour is white to give an unobtrusive appearance.
The tape has 30 individual SMD 5050 LEDs per metre and is 10mm wide.
The tape is IP65 rated so suitable for wet areas. Please check the IP65 specifications for more details on usage.
This tape should be powered by a 24v driver which is of a greater wattage rating than the tape being driven. Here are some compatible 24v drivers The tape can be simply switched or controlled by a remote controlled dimmer with the appropriate 24 volt PSU.
The tape is supplied in a 5m roll and can be cut to the desired length along the prescribed cut marks. Connectors are then available from the accessories section to wire up the cut lengths.
Should you require any advise or shorter lengths cutting with soldered leads please call for details.