RGB LED Strip Controller CT302-RF

A Multi function RGB LED dimmer ideally suited to controlling LED Tape. This LED Strip controller allows RGB tape to be lit to the desired colour by simply touching the colour ring on the chosen colour. By sliding your finger around the colour ring the LED strip will dynamically change colour and you can simply stop at the required colour. There are also buttons to change the intensity of the light so the tape can be dimmed to the chosen level.
The controller also allows selection of any of 10 preset light changing sequences for example, RGB gradual change or the RGB jump change.
This controller can be used for either 12v volt or 24 volt tape.
Maximum current rating of 18 amps giving 216 watts at 12 volts or 432 watts at 24 volts.
This means that up to 30m of 14.4W/m 24 volt LED tape can be controlled or 15m of 12 volt LED tape. For 7.2W/m tape the lengths can be doubled.
Utilising wireless RF control up to a maximum distance of 20m without obstructions.
Dimensions of receiving unit is 165mm long x 53mm wide and 25mm high.
To see the total range of strip from SLB in both 12v and 24v versions which can be used with these controllers please take a look at LED Strip.