RF Dimmer Controller RGBW SR1009FA

A constant voltage dimmer and controller for wireless RGBW and RGB LED control.
4 channel control with 5amps per channel maximum loading.
This device is an ideal way to control RGB or RGBW tape in conjunction with the SR2818WIN or SR2818WIN-D hubs. The control can then be through your phone using the Easylighting app or by using the 4 zone controller SR-2858Z4. This has an easy to use interface with colour wheel control for different zones.
The power for the lighting is from a constant voltage 12 or 24v LED driver which should be purchased separately.
The SR1009FA gives complete control over the colours and the dimming level.
The wiring is simply done by connecting a 12v or 24v driver to the input and the RGB/W tape to the output.
For long LED tape lengths please use a 3 or 4 channel data repeater, available separately to get even bright lighting with no drop off in brightness.
Compact dimensions or approximately 179x45x19mm.
Click to download the wiring instructions PDF
Click to download EasyLighting Setup Guide
If you need advise on these products please get in touch.